|
Cender, T, A., P. Simacek, and S. G. Advani, “A Method to Determine Open Pore Volume with Pulse Decay,” Applied Physics Letters, 105, 134101 (2014), http://dx.doi.org/10.1063/1.4896854 |
| Bhargava, S., M. Kubota, R. D. Lewis, S. G. Advani, A. K. Prasad, and J. M. Deitzel, “Ultraviolet, Water, and Thermal Aging Studies of a Waterborne Polyurethane Elastomer-based High Reflectivity Coating,” Progress in Organic Coatings, 79, pp. 75-82, February 2015.
|
| Chowdhury, S. C., G. R. Swenson, B. Z. (Gama) Haque, and J. W. Gillespie, Jr., “Molecular Dynamics Simulations of Single-Walled Carbon Nanotube Bundle under Mechanical Loading,” FEATURE ARTICLE. SAMPE Journal, 51 (3), May/June 2015. http://www.nxtbook.com/nxtbooks/sampe/journal_20150506/#/42
|
| Gallo, G. J., E. T. Thostenson, “Electrical Characterization and Modeling of Carbon Nanotube and Carbon Fiber Self-sensing Composites for Enhanced Sensing of Microcracks,” Materials Today Communications 3, pp. 17-26, 2015. http://www.sciencedirect.com/science/article/pii/S2352492815000185
|
| (Gama) Haque, B. Z., and J. W. Gillespie Jr., “Penetration and Perforation of Composite Structure”, Mechanical Engineering Research Journal, Dept. of Mech. Eng. CUET (ISSN:1990- 5491). 9, pp. 37-42, 2013. Published Online March 2015. http://www.cuet.ac.bd/merj/files/MERJVol-9,%202013,%20page%2037-42.pdf
|
| Gao, X., J. W., Gillespie, Jr., R. E. Jensen, W. Li, B. Z. (Gama) Haque, S. H. McKnight, “Effect of Fiber Surface Texture on the Mechanical Properties of Glass Fiber Reinforced Epoxy Composite,” Composites:Part A (2015), http://dx.doi.org/10.1016/j.compositesa.2015.03.023
|
| Khattra, N. S., M. H. Santare, A. M. Karlsson, T. Schmiedel, F. C. Busby, “Effect of Water Transport on Swelling and Stresses in PFSA Membranes,” Fuel Cells, 15, pp.178- 188, 2015. http://onlinelibrary.wiley.com/doi/10.1002/fuce.201400058/abstract
|
| Kelly, G. S., S. G. Advani, J. W. Gillespie, Jr., “A Model to Describe Stick-Slip Transition Time during Ultrasonic Consolidation,” Int. Journal of Advanced Manufacturing Technology, http://dx.doi.org/10.1007/s00170-015-6939-z.
|
| Yeager, M. and S. G. Advani, “Numerical Model of Fiber Wetting with Finite Resin Volume,” Integrating Materials and Manufacturing Innovation, 4 (3), March 2015. http://dx.doi.org/10.1186/s40192-015-0032-1
|
| Zhang, D., D. Heider, and J. W. Gillespie, Jr., “Determination of Void Statistics and Statistical Representative Volume Elements (SRVE) in Carbon Fiber Reinforced Thermoplastic Prepregs,” Journal of Thermoplastic Composite Materials, 2015. http://dx.doi.org/10.1177/0892705715618002
|
| Zhang, D., D. Heider, and J. W. Gillespie, Jr., “Determination of Void Statistics and Statistical Representative Volume Elements (SRVE) in Carbon Fiber Reinforced Thermoplastic Prepregs,” Journal of Thermoplastic Composite Materials, 2015.http://dx.doi.org/10.1177/0892705715618002
|
| Tamrakar, S., Q. An, E. T. Thostenson, A. Rider, B. Z. Haque, and J. W. Gillespie, Jr., “Tailoring Interfacial Properties by Controlling Carbon Nanotube Coating Thickness on Glass Fibers using Electrophoretic Deposition,” American Chemical Society Applied Materials & Interfaces, 8 (2) pp. 1501-1510, December 2015. http://dx.doi.org/10.1021/acsami.5b10903
|
| McDaniel, P. B., J. M. Deitzel, and J. W. Gillespie, Jr., “Structural Hierarchy and Surface Morphology of Highly Drawn Ultra High Molecular Weight Polyethylene Fibers Studied by Atomic Force Microscopy and Wide Angle X-Ray Diffraction,” Journal of Polymer Research, 69, pp. 148 – 158, 2015. http://dx.doi.org/10.1016/j.polymer.2015.05.010
|
| Obaid, A., D. Heider, J. W. Gillespie, Jr., “Investigation of Electro-Mechanical Behavior of Carbon Nanotube Yarns during Tensile Loading,” Carbon, 93, pp731 – 741, November 2015. http://dx.doi.org/10.1016/j.carbon.2015.05.091
|
| Haque, B. Z. (Gama) and J. W. Gillespie, Jr., “A New Penetration Equation for Ballistic Limit Analysis,” Journal of Thermoplastic Composite Materials, 28.7 (2015): 950-972, http://dx.doi.org/10.1177/0892705713495430
|
| Kubota, M., Prasad, A. K., Deitzel, J. M., Teather, E. W., & Advani, S. G. (2015). "Thin polymeric film microstructure manipulation for diffused reflectance applications" Polymer Engineering & Science, 55(12), 2878-2883. http://dx.doi.org/10.1002/pen.24179
|
| Sockalingam, S., J. W. Gillespie, Jr., and M. Keefe, “Dynamic Modeling of Kevlar KM2 Single Fiber Subjected to Transverse Impact,” International Journal of Solids and Structures, 67-68, pp. 297 – 310, August 2015. http://dx.doi.org/10.1016/j.ijsolstr.2015.04.031
|
| Yu, H., D. Heider, S. G. Advani, “A 3D microstructure based resistor network model for the electrical resistivity of unidirectional carbon composites,” Composite Structures, v. 134, p. 740-749, 2015, http://dx.doi.org/10.1016/j.compstruct.2015.08.131
|
| Rider, A.N. E. Yeo, J. Gopalakrishna, E.T. Thostenson, N. Brack. “Hierarchical composites with high-volume fractions of carbon nanotubes: Influence of plasma surface treatment and thermoplastic nanophase-modified epoxy”, Carbon 94 (2015): 971-981, http://dx.doi.org/10.1016/j.carbon.2015.07.076
|
| Gallo, G. J., and E. T. Thostenson. “Spatial damage detection in electrically anisotropic fiber-reinforced composites using carbon nanotube networks.” Composite Structures (2015). http://dx.doi.org/10.1016/j.compstruct.2015.07.082
|
| Dai, H., E. T. Thostenson, and T. Schumacher. “Processing and Characterization of a Novel Distributed Strain Sensor Using Carbon Nanotube-Based Nonwoven Composites.” Sensors 15.7 (2015): 17728-17747. http://dx.doi.org/10.3390/s150717728
|
| Quan, Z., A. Wu, M. Keefe, X. Qin, J. Yu, J. Suhr, J.H. Byun, B.S. Kim, and T.W. Chou. “Additive manufacturing of multi-directional preforms for composites: opportunities and challenges.” Materials Today 18, no. 9 (2015): 503-512. http://dx.doi.org/10.1016/j.mattod.2015.05.001
|
| Mäder, E., Liu, J. W., Hiller, J., Lu, W., Li, Q., Zhandarov, S., & Chou, T. W. (2015). "Coating of carbon nanotube fibers: variation of tensile properties, failure behavior and adhesion strength" Frontiers in Materials, 2, 53. http://dx.doi.org/10.3389/fmats.2015.00053
|
| Yu, J., Wang, L., Lai, X., Pei, S., Zhuang, Z., Meng, L., Huang, Y., Li, Q., Lu, W., Byun, J.H. and Oh, Y., Yan. Y., Chou, T.W., 2015. "A durability study of carbon nanotube fiber based stretchable electronic devices under cyclic deformation." Carbon,94, pp.352-361. http://dx.doi.org/10.1016/j.carbon.2015.07.009
|
| Meng, F. C., Lu, W. B., Li, Q. W., Byun, J. H., Oh, Y., & Chou, T. W. (2015). "Graphene-based fibers: a review. Advanced Materials", 27(35), 5113-5131. http://dx.doi.org/10.1002/adma.201501126
|
| Deitzel, J., P. McDaniel, and J. W. Gillespie, Jr., Chapter 10: High Performance Polyethylene Fibers. In Structure and Properties of High- Performance Fibers; Bhat, G., Ed; Elsevier, November 2015. |
